Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

Can You Wash Keyboard Switches?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

No. Do not wash keyboard switches under running water or soak them. Water can damage the metal contacts inside a switch and wash out the lubricant, so a switch that gets wet can stick or stop registering. Remove hot-swappable switches from the board and clean them dry instead, and wipe a membrane keyboard's surface without removing anything.

  1. Check whether your switches come out

    Mechanical switches sit in the board in two ways. On a hot-swappable board you can pull a switch out without soldering, and the YUNZII B98 PRO, the SOLAKAKA A99 Pro and the KiiBoom Phantom98 Lite all list hot-swappable switches. The AULA S99 is a membrane keyboard and does not support hot-swapping, so its switches cannot be pulled out. If your board is soldered or membrane, skip the removal steps below and clean the surface only.

  2. Take the keycaps and switches out first

    Unplug the keyboard and shut the computer down before you start. Pull the keycaps off with a keycap puller, since the SOLAKAKA A99 Pro comes with one, then lift each switch out with a switch puller. Keep the keycaps and switches in separate containers so you know where each one goes back. Never wash switches while they are still in the board, since water reaches the contacts and the board underneath.

  3. Clean switches dry instead of washing them

    Brush dust off each switch with a soft brush and blow out the gaps with compressed air. Wipe the outside with a dry cloth and leave the inside alone, since the contacts and the factory lubricant are inside the housing. Water and soap can leave residue on the contacts and strip the lubricant, which makes a switch feel rough or stick. If a switch still feels gritty after dry cleaning, replace it with a fresh switch rather than washing it.

  4. Let everything dry before you put it back

    Keycaps can be washed separately in warm water with a little soap, then rinsed and left to air dry. Wait until the keycaps and the board are fully dry to the touch before you press the switches and keycaps back in. A switch that goes back in damp can short or corrode, and a keycap that is still wet traps moisture under it. Press every key after reassembly and check for keys that stick or miss presses.

  5. Clean a membrane keyboard on the surface

    A membrane keyboard keeps its switches fixed inside the board, and the AULA S99 is a membrane keyboard. Shake out loose crumbs, brush the gaps between the keys, and wipe the keycaps and the surface with a lightly damp cloth. Do not pour water over the board or soak it, since liquid can reach the membrane layers underneath. If keys stick after surface cleaning, contact the maker for help rather than opening the board.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A membrane keyboard that does not support hot-swapping, so its switches stay in the board and you clean the surface instead of pulling switches out.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A hot-swappable mechanical keyboard with Milk V2 Linear switches that pull out for cleaning without soldering, in a 96% layout with a number pad.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A hot-swappable mechanical keyboard with LEOBOG star vector switches that pull out for cleaning, and it comes with a keycap puller.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A hot-swappable mechanical keyboard with Mochi switches that pull out for cleaning without soldering, with VIA customization for keys and lighting.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Can you rinse a mechanical switch under water?

No. Water can reach the metal contacts and wash out the lubricant inside the housing, which can make the switch stick or stop registering. Clean switches dry with a brush and compressed air, and only wash keycaps, which can be removed and dried separately.

Can you wash keycaps in soapy water?

Yes. Pull the keycaps off the board, wash them in warm water with a little soap, rinse them, and let them air dry fully before you press them back on. Never put them back while they are still damp.

What should you do if a switch still sticks?

Clean it again dry, then check whether the switch or the keycap is the cause by swapping in a spare switch if your board is hot-swappable. If cleaning and swapping do not help, contact the maker for help.

Do membrane keyboards need different cleaning?

Yes. Membrane keyboards keep their switches fixed in the board, so shake out crumbs, brush the gaps, and wipe the surface with a lightly damp cloth. Never soak the board.

Ranked keyboards guides