Amazon Black Friday Week deals

Paid link

Keyboards & Mice · How-to guide

Can You Use Magnetic Switches on Any Keyboard?

We earn a commission when you buy through our links, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.
Short answer

No. Magnetic switches only work in a keyboard built for them, because the board needs Hall effect sensors under each key to read the magnet in the switch. You need a keyboard that lists magnetic switch support, or a hot-swappable board that accepts them.

  1. What a magnetic switch needs

    A magnetic switch uses a magnet and a sensor in the board, instead of metal contacts that close when you press the key. The board reads how far the magnet moves and registers the press at the point set in software. Without that sensor under the key, the board cannot see the switch at all. That is why the switch and the board have to be made for each other.

  2. Check whether your board takes them

    Look for magnetic switch support in the keyboard's spec sheet or the maker's product page before you buy switches. A hot-swappable board is not enough on its own: the sockets have to accept magnetic switches, and the board has to have the sensors. If the listing only says the board takes 3-pin and 5-pin mechanical switches, treat that as no support for magnetic switches and check with the maker.

  3. Membrane and soldered boards stay out

    A membrane keyboard reads presses through a rubber layer, so magnetic switches cannot fit into it. A board with soldered switches also stays out unless you desolder every switch, and even then the board still reads presses through metal contacts. The practical route is a keyboard made for magnetic switches from the start.

  4. What to look for when buying

    Buy a keyboard that names magnetic switches in its spec sheet and says which switch models it takes. Check the layout, the connection types and the software, since those decide whether the board fits your desk and your computer. If you already own a hot-swappable board, confirm with the maker that its sockets and sensors take magnetic switches before ordering them.

What you need

AULA S99 Gaming Keyboard

AULA S99 Gaming Keyboard

A 96% membrane keyboard with Bluetooth 5.0, 2.4GHz and USB-C, a number pad and RGB backlight. It does not support hot-swapping, so magnetic switches do not fit it.

View on Amazon
YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

YUNZII B98 PRO 96% Wireless Mechanical Keyboard (Blue

A 96% hot-swappable keyboard with Milk V2 linear switches, QMK/VIA and tri-mode Bluetooth 5.0, 2.4GHz and USB-C. Its sockets take 3-pin and 5-pin switches.

View on Amazon
SOLAKAKA A99 Pro Mechanical Keyboard

SOLAKAKA A99 Pro Mechanical Keyboard

A 96% hot-swappable keyboard with LEOBOG star vector switches, an LCD screen and a metal knob, taking 3-pin and 5-pin switches.

View on Amazon
KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

KiiBoom Phantom98 Lite 96% Wireless Mechanical Gaming Keyboard

A 96% hot-swappable keyboard with Mochi switches, VIA support and 2.4GHz and USB-C connections. Its hot-swappable sockets let you change switches without soldering.

View on Amazon

These come from our ranked list Best 96 Keyboard, which compares them spec by spec.

FAQ

Can I put magnetic switches in a hot-swappable keyboard?

Only if the board is made for magnetic switches. Hot-swappable sockets that take ordinary 3-pin and 5-pin switches still need Hall effect sensors under each key, so check the maker's spec sheet first.

Do magnetic switches work in a membrane keyboard?

No. A membrane keyboard reads presses through a rubber layer, so a magnetic switch cannot fit into it. You need a keyboard built for magnetic switches.

How do I know if my keyboard supports magnetic switches?

Check the keyboard's spec sheet or the maker's product page for magnetic switch support and the switch models it takes. If the page only lists ordinary mechanical switches, ask the maker before buying.

Ranked keyboards guides