Best CPU Cooler for Mid Tower (2026): Our 4 Picks Ranked
Choose the Thermalright Peerless Assassin 120 Vision MAX ARGB White CPU Air if you want a dual-tower air cooler with six copper heat pipes, two 120mm fans at 2150 RPM, and a 5-inch IPS screen. It stands 164mm tall and supports AMD AM4/AM5 and Intel LGA1851/1700/1150/1151/1155/1156/1200. Height, socket support, and fan size separate the four coolers.
Your shortlist at a glance
PCKitHQ scores range from 9.2 to 9.8. See how we pick.
| Product and key specifications | Score and retailer |
|---|---|
01![]() Best Overall Thermalright Peerless Assassin 120 Vision MAX ARGB White CPU Air CoolerCooler type: Air, Socket: AMD: AM4/AM5; Intel: LGA1851/1700/1150/1151/1155/1156/1200 | 9.8PCKitHQ scoreView on Amazon |
02![]() | 9.6PCKitHQ scoreView on Amazon |
03![]() Also Consider ID-COOLING FROZN A620 PRO SE Dual-Tower CPU CoolerCooler type: Air, Socket: Intel LGA1851/1700/1200/115X & AMD AM5/AM4 | 9.4PCKitHQ scoreView on Amazon |
04![]() | 9.2PCKitHQ scoreView on Amazon |
A closer look at each configuration
Thermalright Peerless Assassin 120 Vision MAX ARGB White CPU Air Cooler
score
A dual-tower design with six copper heat pipes, two 120mm fans, and a 5-inch IPS screen defines this 164mm air cooler.

- Cooler type
- Air
- Socket
- AMD: AM4/AM5; Intel: LGA1851/1700/1150/1151/1155/1156/1200
The Thermalright Peerless Assassin 120 Vision MAX ARGB White is a dual-tower air cooler with six pure copper heat pipes and a nickel-plated copper base. Its two 120mm fans run at 2150 RPM with 69 CFM airflow and operating noise of 27 dB(A) or less, using S-FDB V2 bearings. The dual fans use 4-pin PWM interfaces and a 5V 3-pin ARGB interface. The magnetic top cover holds a 5-inch IPS LCD screen with 480x854 resolution, and the TRCC control software supports custom background themes. The cooler stands 164mm tall with overall dimensions of 125x135x164mm, and it supports AMD AM4/AM5 and Intel LGA1851/1700/1150/1151/1155/1156/1200 sockets. Installation on AMD platforms uses the motherboard original backplate, which is not included.
Choose it if
- You want a 5-inch IPS screen on the cooler
- You want six copper heat pipes and two 120mm fans
Consider another if
- You need a cooler shorter than 164mm like the FROZN
- You need a compact cooler for an ITX case like the SE-903-XT V2
ID-COOLING SE-903-XT V2 Black Compact CPU Air Cooler
score
A compact air cooler with three heat pipes, a 100mm PWM fan, and a 2-year warranty defines this small-footprint pick.

- Cooler type
- Air
- Warranty
- 2 Years
The ID-COOLING SE-903-XT V2 Black is a compact CPU air cooler with three heat pipes and a 100mm PWM fan with direct-touch heatpipes. The upgraded 100mm fan moves more air than the previous 92mm version. Its low-profile footprint avoids interference with RAM and motherboard components, and it suits small and mid-size cases including ITX and mATX systems. The upgraded universal mounting bracket works with Intel and AMD platforms. Fin-lock structure and reinforced fan clips keep the aluminum fins secured. The V2 design is more refined than the previous generation, with a clean, balanced look for gaming, office, or home PC builds. The warranty runs 2 years.
Choose it if
- You want a compact cooler for a small or mid-size case
- You want a 100mm PWM fan with direct-touch heatpipes
Consider another if
- You need six heat pipes like the FROZN cooler
- You need dual 120mm fans like the FROZN cooler
ID-COOLING FROZN A620 PRO SE Dual-Tower CPU Cooler
score
A dual-tower cooler with six heat pipes, dual 120mm fans, and a 157mm height defines this pick.

- Cooler type
- Air
- Socket
- Intel LGA1851/1700/1200/115X & AMD AM5/AM4
- Weight
- 2.62 lb
The ID-COOLING FROZN A620 PRO SE is a dual-tower CPU cooler with six 6mm copper heat pipes and two 120mm PWM fans. The fans run at a maximum noise level of 27.2 dB(A), and the cooler stands 157mm tall and weighs 2.62 lb. It gives 40mm clearance for standard RAM and a maximum of 63mm height with the cut-out fin. The blackout cooler blends into cases with black or dark-colored interiors. The cooler supports Intel LGA1851/1700/1200/115X and AMD AM5/AM4 sockets, and the dual-tower heatsink fits most tower cases.
Choose it if
- You want six heat pipes with dual 120mm fans
- You want 40mm clearance for standard RAM
Consider another if
- You need a 164mm-tall cooler like the Thermalright
- You need a compact cooler for an ITX case like the SE-903-XT V2
DS 2200RPM PWM CPU Cooling Fans
score
A 90mm PWM fan at 1000-2200 RPM with ARGB lighting defines this Intel-only cooler.

- Socket
- Intel Socket 775/1150/1151/1155/1156/1366/1200
The DS leddess cooler uses a 90mm PWM fan that runs from 1000 to 2200 RPM for automatic speed control through the motherboard. The 9cm fan gives high flow for heat dissipation. Its black aluminum design works with Intel sockets 775, 1150, 1151, 1155, 1156, 1366 and 1200. The ARGB fans work with ASUS Aura Sync, MSI Mystic Light Sync, and ASRock RGB LED or remote control. The cooler is built for mid and full tower cases.
Choose it if
- You want a 90mm PWM fan with ARGB lighting
- You want Intel LGA 1200 or 115X socket support
Consider another if
- You need AMD AM4 or AM5 socket support
- You need a 120mm fan like the FROZN cooler
Make the choice for your setup
Cooler height and case clearance
Height is the figure that decides whether a cooler fits a mid-tower case, so compare each height with the clearance in your case. The Thermalright stands 164mm tall, and the FROZN stands 157mm tall. The Thermalright uses a dual-tower, dual-fan layout, and the FROZN uses a dual-tower heatsink with two 120mm fans. The FROZN gives 40mm clearance for standard RAM and a maximum of 63mm height with the cut-out fin. The SE-903-XT V2 is the compact pick, with a low-profile footprint that avoids interference with RAM and motherboard components for small and mid-size cases including ITX and mATX systems. The DS leddess cooler is built for mid and full tower cases. Check the 164mm and 157mm figures against your case before choosing, and keep each height with its own cooler.
Sockets and platforms
Socket support differs across the four coolers, so check the socket list for the exact cooler you choose. The Thermalright supports AMD AM4/AM5 and Intel LGA1851/1700/1150/1151/1155/1156/1200. The FROZN supports Intel LGA1851/1700/1200/115X and AMD AM5/AM4. The SE-903-XT V2 uses an upgraded universal mounting bracket for Intel and AMD platforms. The DS leddess cooler supports Intel sockets 775, 1150, 1151, 1155, 1156, 1366 and 1200. The Thermalright includes mounting kits for both platforms, and installation on AMD platforms uses the motherboard original backplate, which is not included with the product. The FROZN and Thermalright lists both include Intel LGA1851 and LGA1700 with AMD AM4 and AM5, while the DS list covers Intel sockets 775, 1150, 1151, 1155, 1156, 1366 and 1200. Compare the socket lists before choosing, and keep each list with its own cooler. If that fits your setup better, see our guide to the Best 240 AIO.
Fans, heat pipes and screens
Fan size, heat pipe count, and the display screen separate these coolers. The Thermalright has six pure copper heat pipes, two 120mm fans at 2150 RPM, 69 CFM airflow, and a 5-inch IPS LCD screen with 480x854 resolution. The Thermalright screen supports dynamic and static backgrounds as well as video playback through the TRCC software. The FROZN has six 6mm copper heat pipes and two 120mm PWM fans with a maximum noise level of 27.2 dB(A). The SE-903-XT V2 has three heat pipes and a 100mm PWM fan with direct-touch heatpipes. The DS leddess cooler has a 90mm PWM fan that runs from 1000 to 2200 RPM. Compare fan size, heat pipe count, and screen against your build before choosing.
For a wider shortlist, start with AIO vs Air Cooler.
FAQ: CPU Cooler for Mid Tower
Which cooler is the tallest here?
The Thermalright at 164mm is taller than the FROZN at 157mm. The FROZN stands 157mm tall. The SE-903-XT V2 is the compact pick with a low-profile footprint. The DS leddess cooler is built for mid and full tower cases. Check the 164mm and 157mm figures against your case clearance before choosing.
Which sockets do these coolers support?
The Thermalright supports AMD AM4/AM5 and Intel LGA1851/1700/1150/1151/1155/1156/1200. The FROZN supports Intel LGA1851/1700/1200/115X and AMD AM5/AM4. The SE-903-XT V2 uses a universal mounting bracket for Intel and AMD platforms. The DS leddess cooler supports Intel sockets 775, 1150, 1151, 1155, 1156, 1366 and 1200.
Which cooler has a display screen?
The Thermalright, with a 5-inch IPS LCD screen at 480x854 resolution on its magnetic top cover. The TRCC control software supports custom background themes for the display. The FROZN, SE-903-XT V2, and DS leddess coolers are described by their fans and heatsinks.



